:: ASTM Standard Spec :: A/SA516-70, A/SA515-70, ST52-3, S355J2+N, SAILMA 350HI, SAILMA 450HI

ASTM Standard Spec

ASTM STANDARD SPECIFICATION

A1-00 Standard Specification for Carbon Steel Tee Rails
A2-02 Standard Specification for Carbon Steel Girder Rails of Plain, Grooved, and Guard Types
A3-01 Standard Specification for Steel Joint Bars, Low, Medium, and High Carbon (Non-Heat-Treated)
A6/A6M-03c Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling
A20/A20M-02 Standard Specification for General Requirements for Steel Plates for Pressure Vessels
A27/A27M-03 Standard Specification for Steel Castings, Carbon, for General Application
A29/A29M-03 Standard Specification for Steel Bars, Carbon and Alloy, Hot-Wrought and Cold-Finished, General Requirements for
A31-00 Standard Specification for Steel Rivets and Bars for Rivets, Pressure Vessels
A34/A34M-01 Standard Practice for Sampling and Procurement Testing of Magnetic Materials
A36/A36M-03a Standard Specification for Carbon Structural Steel
A47/A47M-99 Standard Specification for Ferritic Malleable Iron Castings
A48/A48M-03 Standard Specification for Gray Iron Castings
A49-01 Standard Specification for Heat-Treated Carbon Steel Joint Bars, Microalloyed Joint Bars, and Forged Carbon Steel Compromise Joint Bars
A53/A53M-02 Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless
A65-01 Standard Specification for Steel Track Spikes
A66-01 Standard Specification for Steel Screw Spikes
A67-00 Standard Specification for Steel Tie Plates, Low-Carbon and High-Carbon Hot-Worked
A74-03b Standard Specification for Cast Iron Soil Pipe and Fittings
A82-02 Standard Specification for Steel Wire, Plain, for Concrete Reinforcement
A90/A90M-01 Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
A99-03 Standard Specification for Ferromanganese
A100-93(2000) Standard Specification for Ferrosilicon
A101-93(2000) Standard Specification for Ferrochromium
A102-93(2000) Standard Specification for Ferrovanadium
A105/A105M-03 Standard Specification for Carbon Steel Forgings for Piping Applications
A106-02a Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service
A108-03 Standard Specification for Steel Bar, Carbon and Alloy, Cold-Finished
A109/A109M-03 Standard Specification for Steel, Strip, Carbon (0.25 Maximum Percent), Cold-Rolled
A111-99a Standard Specification for Zinc-Coated (Galvanized) "Iron" Telephone and Telegraph Line Wire
A116-00 Standard Specification for Metallic-Coated, Steel Woven Wire Fence Fabric
A121-99 Standard Specification for Zinc-Coated (Galvanized) Steel Barbed Wire
A123/A123M-02 Standard Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products
A125-96(2001) Standard Specification for Steel Springs, Helical, Heat-Treated
A126-95(2001) Standard Specification for Gray Iron Castings for Valves, Flanges, and Pipe Fittings
A128/A128M-93(2003) Standard Specification for Steel Castings, Austenitic Manganese
A131/A131M-01 Standard Specification for Structural Steel for Ships
A132-89(2000) Standard Specification for Ferromolybdenum
A134-96(2001) Standard Specification for Pipe, Steel, Electric-Fusion (Arc)-Welded (Sizes NPS 16 and Over)
A135-01 Standard Specification for Electric-Resistance-Welded Steel Pipe
A139-00 Standard Specification for Electric-Fusion (Arc)-Welded Steel Pipe (NPS 4 and Over)
A143/A143M-03 Standard Practice for Safeguarding Against Embrittlement of Hot-Dip Galvanized Structural Steel Products and Procedure for Detecting Embrittlement
A144-02 Specification for Ferrotungsten
A146-64(2000) Standard Specification for Molybdenum Oxide Products
A148/A148M-03 Standard Specification for Steel Castings, High Strength, for Structural Purposes
A153/A153M-03 Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware
A159-83(2001) Standard Specification for Automotive Gray Iron Castings
A167-99 Standard Specification for Stainless and Heat-Resisting Chromium-Nickel Steel Plate, Sheet, and Strip
A176-99 Standard Specification for Stainless and Heat-Resisting Chromium Steel Plate, Sheet, and Strip
A178/A178M-02 Standard Specification for Electric-Resistance-Welded Carbon Steel and Carbon-Manganese Steel Boiler and Superheater Tubes
A179/A179M-90a(2001) Standard Specification for Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes
A181/A181M-01 Standard Specification for Carbon Steel Forgings, for General-Purpose Piping
A182/A182M-02 Standard Specification for Forged or Rolled Alloy-Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service
A183-03 Standard Specification for Carbon Steel Track Bolts and Nuts
A184/A184M-01 Standard Specification for Fabricated Deformed Steel Bar Mats for Concrete Reinforcement
A185-02 Standard Specification for Steel Welded Wire Reinforcement, Plain, for Concrete
A192/A192M-02 Standard Specification for Seamless Carbon Steel Boiler Tubes for High-Pressure Service
A193/A193M-03 Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for High-Temperature Service
A194/A194M-03b Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both
A197/A197M-00 Standard Specification for Cupola Malleable Iron
A202/A202M-03 Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Manganese-Silicon
A203/A203M-97(2003) Standard Specification for Pressure Vessel Plates, Alloy Steel, Nickel
A204/A204M-03 Standard Specification for Pressure Vessel Plates, Alloy Steel, Molybdenum
A209/A209M-03 Standard Specification for Seamless Carbon-Molybdenum Alloy-Steel Boiler and Superheater Tubes
A210/A210M-02 Standard Specification for Seamless Medium-Carbon Steel Boiler and Superheater Tubes
A213/A213M-03b Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes
A214/A214M-96(2001) Standard Specification for Electric-Resistance-Welded Carbon Steel Heat-Exchanger and Condenser Tubes
A216/A216M-93(2003) Standard Specification for Steel Castings, Carbon, Suitable for Fusion Welding, for High- Temperature Service
A217/A217M-02 Standard Specification for Steel Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts, Suitable for High-Temperature Service
A220/A220M-99 Standard Specification for Pearlitic Malleable Iron
A225/A225M-03 Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Vanadium-Nickel
A227/A227M-99 Standard Specification for Steel Wire, Cold-Drawn for Mechanical Springs
A228/A228M-02 Standard Specification for Steel Wire, Music Spring Quality
A229/A229M-99 Standard Specification for Steel Wire, Oil-Tempered for Mechanical Springs
A230/A230M-99 Standard Specification for Steel Wire, Oil-Tempered Carbon Valve Spring Quality
A231/A231M-96(2002) Standard Specification for Chromium-Vanadium Alloy Steel Spring Wire
A232/A232M-99 Standard Specification for Chromium-Vanadium Alloy Steel Valve Spring Quality Wire
A234/A234M-03 Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service
A239-95(1999) Standard Practice for Locating the Thinnest Spot in a Zinc (Galvanized) Coating on Iron or Steel Articles
A240/A240M-03c Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
A242/A242M-03a Standard Specification for High-Strength Low-Alloy Structural Steel
A247-67(1998) Standard Test Method for Evaluating the Microstructure of Graphite in Iron Castings
A249/A249M-03a Standard Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes
A250/A250M-95(2001) Standard Specification for Electric-Resistance-Welded Ferritic Alloy-Steel Boiler and Superheater Tubes
A252-98(2002) Standard Specification for Welded and Seamless Steel Pipe Piles
A254-97(2002) Standard Specification for Copper-Brazed Steel Tubing
A255-02 Standard Test Method for Determining Hardenability of Steel
A262-02a Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels
A263-03 Standard Specification for Stainless Chromium Steel-Clad Plate
A264-03 Specification for Stainless Chromium-Nickel Steel-Clad Plate
A265-03 Standard Specification for Nickel and Nickel-Base Alloy-Clad Steel Plate
A266/A266M-03a Standard Specification for Carbon Steel Forgings for Pressure Vessel Components
A268/A268M-03 Standard Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service
A269-02a Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service
A270-03a Standard Specification for Seamless and Welded Austenitic Stainless Steel Sanitary Tubing
A275/A275M-98(2003) Standard Test Method for Magnetic Particle Examination of Steel Forgings
A276-03 Standard Specification for Stainless Steel Bars and Shapes
A278/A278M-01 Standard Specification for Gray Iron Castings for Pressure-Containing Parts for Temperatures Up to 650°F (350°C)
A283/A283M-03 Standard Specification for Low and Intermediate Tensile Strength Carbon Steel Plates
A285/A285M-03 Standard Specification for Pressure Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile Strength
A288-91(2003) Standard Specification for Carbon and Alloy Steel Forgings for Magnetic Retaining Rings for Turbine Generators
A289/A289M-97(2003) Standard Specification for Alloy Steel Forgings for Nonmagnetic Retaining Rings for Generators
A290-02 Standard Specification for Carbon and Alloy Steel Forgings for Rings for Reduction Gears
A291-03 Standard Specification for Steel Forgings, Carbon and Alloy, for Pinions, Gears and Shafts for Reduction Gears
A295-98 Standard Specification for High-Carbon Anti-Friction Bearing Steel
A297/A297M-97(2003) Standard Specification for Steel Castings, Iron-Chromium and Iron-Chromium-Nickel, Heat Resistant, for General Application
A299/A299M-03e1 Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Silicon
A302/A302M-03 Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Molybdenum and Manganese-Molybdenum-Nickel
A304-02 Standard Specification for Carbon and Alloy Steel Bars Subject to End-Quench Hardenability Requirements
A307-03 Standard Specification for Carbon Steel Bolts and Studs, 60 000 PSI Tensile Strength
A308/A308M-03 Standard Specification for Steel Sheet, Terne (Lead-Tin Alloy) Coated by the Hot-Dip Process
A309-01 Standard Test Method for Weight and Composition of Coating on Terne Sheet by the Triple-Spot Test
A311/A311M-95(2000) Standard Specification for Cold-Drawn, Stress-Relieved Carbon Steel Bars Subject to Mechanical Property Requirements
A312/A312M-03 Standard Specification for Seamless and Welded Austenitic Stainless Steel Pipes
A313/A313M-03 Standard Specification for Stainless Steel Spring Wire
A314-97(2002) Standard Specification for Stainless Steel Billets and Bars for Forging
A319-71(2001) Standard Specification for Gray Iron Castings for Elevated Temperatures for Non-Pressure Containing Parts
A320/A320M-03 Standard Specification for Alloy-Steel Bolting Materials for Low-Temperature Service
A321-90(2001) Standard Specification for Steel Bars, Carbon, Quenched and Tempered
A322-91(2001) Standard Specification for Steel Bars, Alloy, Standard Grades
A323-93(2000) Standard Specification for Ferroboron
A324-73(2000) Standard Specification for Ferrotitanium
A325-02 Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength
A325M-03 Standard Specification for Structural Bolts, Steel, Heat Treated 830 Mpa Minimum Tensile Strength [Metric]
A327-91(1997) Standard Test Methods for Impact Testing of Cast Irons
A327M-91(1997) Standard Test Methods for Impact Testing of Cast Irons (Metric)
A328/A328M-03 Standard Specification for Steel Sheet Piling
A331-95(2000) Standard Specification for Steel Bars, Alloy, Cold-Finished
A333/A333M-99 Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service
A334/A334M-99 Standard Specification for Seamless and Welded Carbon and Alloy-Steel Tubes for Low-Temperature Service
A335/A335M-03 Standard Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service
A336/A336M-03a Standard Specification for Alloy Steel Forgings for Pressure and High-Temperature Parts
A338-84(1998) Standard Specification for Malleable Iron Flanges, Pipe Fittings, and Valve Parts for Railroad, Marine, and Other Heavy Duty Service at Temperatures Up to 650°F (345°C)
A340-03a Standard Terminology of Symbols and Definitions Relating to Magnetic Testing
A341/A341M-00 Standard Test Method for Direct Current Magnetic Properties of Materials Using D-C Permeameters and the Ballistic Test Methods
A342/A342M-99 Standard Test Methods for Permeability of Feebly Magnetic Materials
A343/A343M-03 Standard Test Method for Alternating-Current Magnetic Properties of Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method and 25-cm Epstein Test Frame
A345-98 Standard Specification for Flat-Rolled Electrical Steels for Magnetic Applications
A348/A348M-00 Standard Test Method for Alternating Current Magnetic Properties of Materials Using the Wattmeter-Ammeter-Voltmeter Method, 100 to 10 000 Hz and 25-cm Epstein Frame
A350/A350M-02b Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components
A351/A351M-03 Standard Specification for Castings, Austenitic, Austenitic-Ferritic (Duplex), for Pressure-Containing Parts
A352/A352M-03 Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing Parts, Suitable for Low-Temperature Service
A353/A353M-93(1999) Standard Specification for Pressure Vessel Plates, Alloy Steel, 9 Percent Nickel, Double-Normalized and Tempered
A354-03a Standard Specification for Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners
A355-89(2000) Standard Specification for Steel Bars, Alloys, for Nitriding
A356/A356M-98(2003) Standard Specification for Steel Castings, Carbon, Low Alloy, and Stainless Steel, Heavy-Walled for Steam Turbines
A358/A358M-01 Standard Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Alloy Steel Pipe for High-Temperature Service
A363-98 Standard Specification for Zinc-Coated (Galvanized) Steel Overhead Ground Wire Strand
A367-60(1999) Standard Test Methods of Chill Testing of Cast Iron
A368-95a(2000) Standard Specification for Stainless Steel Wire Strand
A369/A369M-02 Standard Specification for Carbon and Ferritic Alloy Steel Forged and Bored Pipe for High-Temperature Service
A370-03a Standard Test Methods and Definitions for Mechanical Testing of Steel Products
A372/A372M-03 Standard Specification for Carbon and Alloy Steel Forgings for Thin-Walled Pressure Vessels
A376/A376M-02a Standard Specification for Seamless Austenitic Steel Pipe for High-Temperature Central-Station Service
A377-03 Standard Index of Specifications for Ductile-Iron Pressure Pipe
A380-99e1 Standard Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, and Systems
A381-96(2001) Standard Specification for Metal-Arc-Welded Steel Pipe for Use With High-Pressure Transmission Systems
A384/A384M-02 Standard Practice for Safeguarding Against Warpage and Distortion During Hot-Dip Galvanizing of Steel Assemblies
A385-03 Standard Practice for Providing High-Quality Zinc Coatings (Hot-Dip)
A387/A387M-03 Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum
A388/A388M-03 Standard Practice for Ultrasonic Examination of Heavy Steel Forgings
A389/A389M-03 Standard Specification for Steel Castings, Alloy, Specially Heat-Treated, for Pressure-Containing Parts, Suitable for High-Temperature Service
A390-95(2001) Standard Specification for Zinc-Coated (Galvanized) Steel Poultry Fence Fabric (Hexagonal and Straight Line)
A391/A391M-01 Standard Specification for Grade 80 Alloy Steel Chain
A392-03 Standard Specification for Zinc-Coated Steel Chain-Link Fence Fabric
A394-00 Standard Specification for Steel Transmission Tower Bolts, Zinc-Coated and Bare
A395/A395M-99 Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures
A400-69(2000) Standard Practice for Steel Bars, Selection Guide, Composition, and Mechanical Properties
A401/A401M-03 Standard Specification for Steel Wire, Chromium-Silicon Alloy
A403/A403M-03a Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings
A407-93(1998) Standard Specification for Steel Wire, Cold-Drawn, for Coiled-Type Springs
A409/A409M-01 Standard Specification for Welded Large Diameter Austenitic Steel Pipe for Corrosive or High-Temperature Service
A411-98 Standard Specification for Zinc-Coated (Galvanized) Low-Carbon Steel Armor Wire
A413/A413M-01 Standard Specification for Carbon Steel Chain
A414/A414M-01 Standard Specification for Steel, Sheet, Carbon, for Pressure Vessels
A416/A416M-02 Standard Specification for Steel Strand, Uncoated Seven-Wire for Prestressed Concrete
A417-93(1998) Standard Specification for Steel Wire, Cold-Drawn, for Zig-Zag, Square-Formed, and Sinuous-Type Upholstery Spring Units
A418-99(2003) Standard Test Method for Ultrasonic Examination of Turbine and Generator Steel Rotor Forgings
A420/A420M-03 Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service
A421/A421M-02 Standard Specification for Uncoated Stress-Relieved Steel Wire for Prestressed Concrete
A423/A423M-95(2000) Standard Specification for Seamless and Electric-Welded Low-Alloy Steel Tubes
A424-00 Standard Specification for Steel, Sheet, for Porcelain Enameling
A426/A426M-02 Standard Specification for Centrifugally Cast Ferritic Alloy Steel Pipe for High-Temperature Service
A427-02 Standard Specification for Wrought Alloy Steel Rolls for Cold and Hot Reduction
A428/A428M-01 Standard Test Method for Weight [Mass] of Coating on Aluminum-Coated Iron or Steel Articles
A434-90a(2000) Standard Specification for Steel Bars, Alloy, Hot-Wrought or Cold-Finished, Quenched and Tempered
A435/A435M-90(2001) Standard Specification for Straight-Beam Ultrasonic Examination of Steel Plates
A436-84(2001) Standard Specification for Austenitic Gray Iron Castings
A437/A437M-01a Standard Specification for Alloy-Steel Turbine-Type Bolting Material Specially Heat Treated for High-Temperature Service
A439-83(1999) Standard Specification for Austenitic Ductile Iron Castings
A447/A447M-93(2003) Standard Specification for Steel Castings, Chromium-Nickel-Iron Alloy (25-12 Class), for High-Temperature Service
A449-00 Standard Specification for Quenched and Tempered Steel Bolts and Studs
A450/A450M-03 Standard Specification for General Requirements for Carbon, Ferritic Alloy, and Austenitic Alloy Steel Tubes
A451/A451M-02 Standard Specification for Centrifugally Cast Austenitic Steel Pipe for High-Temperature Service
A453/A453M-03 Standard Specification for High-Temperature Bolting Materials, with Expansion Coefficients Comparable to Austenitic Stainless Steels
A455/A455M-03 Standard Specification for Pressure Vessel Plates, Carbon Steel, High-Strength Manganese
A456/A456M-99(2003) Standard Specification for Magnetic Particle Examination of Large Crankshaft Forgings
A459-97(2003) Standard Specification for Zinc-Coated Flat Steel Armoring Tape
A460-94(1999) Standard Specification for Copper-Clad Steel Wire Strand
A463/A463M-02a Standard Specification for Steel Sheet, Aluminum-Coated, by the Hot-Dip Process
A466/A466M-01 Standard Specification for Weldless Chain
A467/A467M-01 Standard Specification for Machine and Coil Chain
A469-94a(1999) Standard Specification for Vacuum-Treated Steel Forgings for Generator Rotors
A470-03 Standard Specification for Vacuum-Treated Carbon and Alloy Steel Forgings for Turbine Rotors and Shafts
A471-02 Standard Specification for Vacuum-Treated Alloy Steel Forgings for Turbine Rotor Disks and Wheels
A472-98(2003) Standard Test Method for Heat Stability of Steam Turbine Shafts and Rotor Forgings
A473-01 Standard Specification for Stainless Steel Forgings
A474-98 Standard Specification for Aluminum-Coated Steel Wire Strand
A475-98 Standard Specification for Zinc-Coated Steel Wire Strand
A476/A476M-00 Standard Specification for Ductile Iron Castings for Paper Mill Dryer Rolls
A478-97(2002) Standard Specification for Chromium-Nickel Stainless Steel Weaving and Knitting Wire
A479/A479M-03 Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels
A480/A480M-03c Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
A481-94(2000) Standard Specification for Chromium Metal
A482-93(2000) Standard Specification for Ferrochrome-Silicon
A483-64(2000) Standard Specification for Silicomanganese
A484/A484M-03a Standard Specification for General Requirements for Stainless Steel Bars, Billets, and Forgings
A485-03 Standard Specification for High Hardenability Antifriction Bearing Steel
A487/A487M-93(2003) Standard Specification for Steel Castings Suitable for Pressure Service
A488/A488M-01e1 Standard Practice for Steel Castings, Welding, Qualifications of Procedures and Personnel
A489-03 Standard Specification for Carbon Steel Lifting Eyes
A490M-03 Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints [Metric]
A490-02 Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength
A491-03 Standard Specification for Aluminum-Coated Steel Chain-Link Fence Fabric
A492-95(2000) Standard Specification for Stainless Steel Rope Wire
A493-95(2000) Standard Specification for Stainless Steel Wire and Wire Rods for Cold Heading and Cold Forging
A494/A494M-03a Standard Specification for Castings, Nickel and Nickel Alloy
A495-94(2000) Standard Specification for Calcium-Silicon Alloys
A496-02 Standard Specification for Steel Wire, Deformed, for Concrete Reinforcement
A497/A497M-02 Standard Specification for Steel Welded Wire Reinforcement, Deformed, for Concrete
A498-98 Standard Specification for Seamless and Welded Carbon, Ferritic, and Austenitic Alloy Steel Heat-Exchanger Tubes with Integral Fins
A499-89(2002) Standard Specification for Steel Bars and Shapes, Carbon Rolled from "T" Rails
A500-03a Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes
A501-01 Standard Specification for Hot-Formed Welded and Seamless Carbon Steel Structural Tubing
A502-03 Standard Specification for Rivets, Steel, Structural
A503/A503M-01(2001)e1 Standard Specification for Ultrasonic Examination of Forged Crankshafts
A504-93(1999) Standard Specification for Wrought Carbon Steel Wheels
A505-00 Standard Specification for Steel, Sheet and Strip, Alloy, Hot-Rolled and Cold-Rolled, General Requirements for
A506-00 Standard Specification for Alloy and Structural Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled
A507-00 Standard Specification for Drawing Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled
A508/A508M-03a Standard Specification for Quenched and Tempered Vacuum-Treated Carbon and Alloy Steel Forgings for Pressure Vessels
A510-03 Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel
A510M-03 Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel [Metric]
A511-96 Standard Specification for Seamless Stainless Steel Mechanical Tubing
A512-96(2001) Standard Specification for Cold-Drawn Buttweld Carbon Steel Mechanical Tubing
A513-00 Standard Specification for Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing
A514/A514M-00a Standard Specification for High-Yield-Strength, Quenched and Tempered Alloy Steel Plate, Suitable for Welding
A515/A515M-03 Standard Specification for Pressure Vessel Plates, Carbon Steel, for Intermediate- and Higher-Temperature Service
A516/A516M-03 Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service
A517/A517M-93(1999) Standard Specification for Pressure Vessel Plates, Alloy Steel, High-Strength, Quenched and Tempered
A518/A518M-99(2003) Standard Specification for Corrosion-Resistant High-Silicon Iron Castings
A519-03 Standard Specification for Seamless Carbon and Alloy Steel Mechanical Tubing
A521-03 Standard Specification for Steel, Closed-Impression Die Forgings for General Industrial Use
A522/A522M-01 Standard Specification for Forged or Rolled 8 and 9% Nickel Alloy Steel Flanges, Fittings, Valves, and Parts for Low-Temperature Service
A523-96(2001) Standard Specification for Plain End Seamless and Electric-Resistance-Welded Steel Pipe for High-Pressure Pipe-Type Cable Circuits
A524-96(2001) Standard Specification for Seamless Carbon Steel Pipe for Atmospheric and Lower Temperatures
A529/A529M-03 Standard Specification for High-Strength Carbon-Manganese Steel of Structural Quality
A530/A530M-03 Standard Specification for General Requirements for Specialized Carbon and Alloy Steel Pipe
A531/A531M-91(2001) Standard Practice for Ultrasonic Examination of Turbine-Generator Steel Retaining Rings
A532/A532M-93a(2003) Standard Specification for Abrasion-Resistant Cast Irons
A533/A533M-93(1999) Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered, Manganese-Molybdenum and Manganese-Molybdenum-Nickel
A534-01 Standard Specification for Carburizing Steels for Anti-Friction Bearings
A536-84(1999)e1 Standard Specification for Ductile Iron Castings
A537/A537M-95(2000) Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel
A539-99 Standard Specification for Electric-Resistance-Welded Coiled Steel Tubing for Gas and Fuel Oil Lines
A540/A540M-00 Standard Specification for Alloy-Steel Bolting Materials for Special Applications
A541/A541M-95(1999) Standard Specification for Quenched and Tempered Carbon and Alloy Steel Forgings for Pressure Vessel Components
A542/A542M-99e1 Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched-and-Tempered, Chromium-Molybdenum, and Chromium-Molybdenum-Vanadium
A543/A543M-93(1999) Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered Nickel-Chromium-Molybdenum
A550-78(2000) Standard Specification for Ferrocolumbium
A551-94(1999) Standard Specification for Steel Tires
A553/A553M-95(2000) Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered 8 and 9 Percent Nickel
A554-03 Standard Specification for Welded Stainless Steel Mechanical Tubing
A555/A555M-97(2002) Standard Specification for General Requirements for Stainless Steel Wire and Wire Rods
A556/A556M-96(2001) Standard Specification for Seamless Cold-Drawn Carbon Steel Feedwater Heater Tubes
A560/A560M-93(1998) Standard Specification for Castings, Chromium-Nickel Alloy
A561-71(1999) Standard Recommended Practice for Macrotech Testing of Tool Steel Bars
A562/A562M-90(2001) Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Titanium for Glass or Diffused Metallic Coatings
A563M-03 Standard Specification for Carbon and Alloy Steel Nuts [Metric]
A563-00 Standard Specification for Carbon and Alloy Steel Nuts
A564/A564M-02a Standard Specification for Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes
A565-03b Standard Specification for Martensitic Stainless Steel Bars for High-Temperature Service
A568/A568M-03 Standard Specification for Steel, Sheet, Carbon, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, General Requirements for
A571/A571M-01 Standard Specification for Austenitic Ductile Iron Castings for Pressure-Containing Parts Suitable for Low-Temperature Service
A572/A572M-03ae1 Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel
A573/A573M-00a Standard Specification for Structural Carbon Steel Plates of Improved Toughness
A574-00 Standard Specification for Alloy Steel Socket-Head Cap Screws
A574M-00 Standard Specification for Alloy Steel Socket-Head Cap Screws [Metric]
A575-96(2002) Standard Specification for Steel Bars, Carbon, Merchant Quality, M-Grades
A576-90b(2000) Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality
A577/A577M-90(2001) Standard Specification for Ultrasonic Angle-Beam Examination of Steel Plates
A578/A578M-96(2001) Standard Specification for Straight-Beam Ultrasonic Examination of Plain and Clad Steel Plates for Special Applications
A579-01 Standard Specification for Superstrength Alloy Steel Forgings
A580/A580M-98 Standard Specification for Stainless Steel Wire
A581/A581M-95b(2000) Standard Specification for Free-Machining Stainless Steel Wire and Wire Rods
A582/A582M-95b(2000)e1 Standard Specification for Free-Machining Stainless Steel Bars
A586-98 Standard Specification for Zinc-Coated Parallel and Helical Steel Wire Structural Strand and Zinc-Coated Wire for Spun-In-Place Structural Strand
A587-96(2001) Standard Specification for Electric-Resistance-Welded Low-Carbon Steel Pipe for the Chemical Industry
A588/A588M-03 Standard Specification for High-Strength Low-Alloy Structural Steel with 50 ksi [345 MPa] Minimum Yield Point to 4-in. [100-mm] Thick
A589-96(2001) Standard Specification for Seamless and Welded Carbon Steel Water-Well Pipe
A591/A591M-98 Standard Specification for Steel Sheet, Electrolytic Zinc-Coated, for Light Coating Weight [Mass] Applications
A592/A592M-89(1999) Standard Specification for High-Strength Quenched and Tempered Low-Alloy Steel Forged Fittings and Parts for Pressure Vessels
A595-98(2002) Standard Specification for Steel Tubes, Low-Carbon, Tapered for Structural Use
A596/A596M-95(1999) Standard Test Method for Direct-Current Magnetic Properties of Materials Using the Ballistic Method and Ring Specimens
A597-87(1999) Standard Specification for Cast Tool Steel
A598/A598M-02 Standard Test Method for Magnetic Properties of Magnetic Amplifier Cores
A599/A599M-02 Standard Specification for Tin Mill Products, Electrolytic Tin-Coated, Cold-Rolled Sheet
A600-92a(1999) Standard Specification for Tool Steel High Speed
A601-96(2000) Standard Specification for Electrolytic Manganese Metal
A602-94(1998) Standard Specification for Automotive Malleable Iron Castings
A603-98(2003) Standard Specification for Zinc-Coated Steel Structural Wire Rope
A604-93(2003) Standard Test Method for Macroetch Testing of Consumable Electrode Remelted Steel Bars and Billets
A606-01 Standard Specification for Steel, Sheet and Strip, High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, with Improved Atmospheric Corrosion Resistance
A608/A608M-02 Standard Specification for Centrifugally Cast Iron-Chromium-Nickel High-Alloy Tubing for Pressure Application at High Temperatures
A609/A609M-91(2002) Standard Practice for Castings, Carbon, Low-Alloy, and Martensitic Stainless Steel, Ultrasonic Examination Thereof
A610-79(2000) Standard Test Methods for Sampling and Testing Ferroalloys for Determination of Size
A612/A612M-03 Standard Specification for Pressure Vessel Plates, Carbon Steel, High Strength, for Moderate and Lower Temperature Service
A615/A615M-04 Standard Specification for Deformed and Plain Billet-Steel Bars for Concrete Reinforcement
A618-01 Standard Specification for Hot-Formed Welded and Seamless High-Strength Low-Alloy Structural Tubing
A623-03 Standard Specification for Tin Mill Products, General Requirements
A623M-03 Standard Specification for Tin Mill Products, General Requirements [Metric]
A624/A624M-98 Standard Specification for Tin Mill Products, Electrolytic Tin Plate, Single Reduced
A625/A625M-03 Standard Specification for Tin Mill Products, Black Plate, Single Reduced
A626/A626M-98 Standard Specification for Tin Mill Products, Electrolytic Tin Plate, Double Reduced
A627-03 Standard Test Methods for Tool-Resisting Steel Bars, Flats, and Shapes for Detention and Correctional Facilities
A629-88(1994)e1 Standard Specification for Tool-Resisting Steel Flat Bars and Shapes for Security Applications
A630-03 Standard Test Methods for Determination of Tin Coating Weights for Electrolytic Tin Plate
A632-02a Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing (Small-Diameter) for General Service
A633/A633M-01 Standard Specification for Normalized High-Strength Low-Alloy Structural Steel Plates
A635/A635M-02 Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Carbon, Commercial Steel, Drawing Steel, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability, Hot-Rolled, General Requirements for
A636-76(2000) Standard Specification for Nickel Oxide Sinter
A638/A638M-00 Standard Specification for Precipitation Hardening Iron Base Superalloy Bars, Forgings, and Forging Stock for High-Temperature Service
A640-97(2002)e1 Standard Specification for Zinc-Coated Steel Strand for Messenger Support of Figure 8 Cable
A641/A641M-98 Standard Specification for Zinc-Coated (Galvanized) Carbon Steel Wire
A644-98(2003) Standard Terminology Relating to Iron Castings
A645/A645M-99a Standard Specification for Pressure Vessel Plates, Five Percent Nickel Alloy Steel, Specially Heat Treated
A646-95(1999) Standard Specification for Premium Quality Alloy Steel Blooms and Billets for Aircraft and Aerospace Forgings
A648-95(2000) Standard Specification for Steel Wire, Hard Drawn for Prestressing Concrete Pipe
A649/A649M-99(2003) Standard Specification for Forged Steel Rolls Used for Corrugating Paper Machinery
A650/A650M-03 Standard Specification for Tin Mill Products, Black Plate, Double Reduced
A653/A653M-03 Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
A656/A656M-03 Standard Specification for Hot-Rolled Structural Steel, High-Strength Low-Alloy Plate with Improved Formability
A657/A657M-03 Standard Specification for Tin Mill Products, Black Plate Electrolytic Chromium-Coated, Single and Double Reduced
A659/A659M-97(2001) Standard Specification for Commercial Steel (CS), Sheet and Strip, Carbon (0.16 Maximum to 0.25 Maximum Percent), Hot-Rolled
A660-96(2001) Standard Specification for Centrifugally Cast Carbon Steel Pipe for High-Temperature Service
A662/A662M-03 Standard Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, for Moderate and Lower Temperature Service
A663/A663M-89(2000) Standard Specification for Steel Bars, Carbon, Merchant Quality, Mechanical Properties
A664-99 Standard Practice for Identification of Standard Electrical Steel Grades in ASTM Specifications
A666-03 Standard Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar
A667/A667M-87(2003) Standard Specification for Centrifugally Cast Dual Metal (Gray and White Cast Iron) Cylinders
A668/A668M-03 Standard Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use
A671-96(2001) Standard Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures
A672-96(2001) Standard Specification for Electric-Fusion-Welded Steel Pipe for High-Pressure Service at Moderate Temperatures
A673/A673M-02 Standard Specification for Sampling Procedure for Impact Testing of Structural Steel
A674-00 Standard Practice for Polyethylene Encasement for Ductile Iron Pipe for Water or Other Liquids
A675/A675M-03 Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality, Mechanical Properties
A677/A677M-99 Standard Specification for Nonoriented Electrical Steel Fully Processed Types
A678/A678M-00a Standard Specification for Quenched-and-Tempered Carbon and High-Strength Low-Alloy Structural Steel Plates
A679/A679M-00 Standard Specification for Steel Wire, High Tensile Strength, Cold Drawn
A681-94(1999) Standard Specification for Tool Steels Alloy
A682/A682M-02 Standard Specification for Steel, Strip, High-Carbon, Cold-Rolled, General Requirements For
A683/A683M-99 Standard Specification for Nonoriented Electrical Steel, Semiprocessed Types
A684/A684M-86(2002) Standard Specification for Steel, Strip, High-Carbon, Cold-Rolled
A686-92(1999) Standard Specification for Tool Steel, Carbon
A688/A688M-03 Standard Specification for Welded Austenitic Stainless Steel Feedwater Heater Tubes
A689-97(2002) Standard Specification for Carbon and Alloy Steel Bars for Springs
A690/A690M-00a Standard Specification for High-Strength Low-Alloy Steel H-Piles and Sheet Piling for Use in Marine Environments
A691-98(2002) Standard Specification for Carbon and Alloy Steel Pipe, Electric-Fusion-Welded for High-Pressure Service at High Temperatures
A693-03 Standard Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
A694/A694M-03 Standard Specification for Carbon and Alloy Steel Forgings for Pipe Flanges, Fittings, Valves, and Parts for High-Pressure Transmission Service
A696-90a(2000) Standard Specification for Steel Bars, Carbon, Hot-Wrought or Cold-Finished, Special Quality, for Pressure Piping Components
A697/A697M-03 Standard Test Method for Alternating Current Magnetic Properties of Laminated Core Specimen Using Voltmeter-Ammeter-Wattmeter Methods
A698/A698M-02 Standard Test Method for Magnetic Shield Efficiency in Attenuating Alternating Magnetic Fields
A700-99e1 Standard Practices for Packaging, Marking, and Loading Methods for Steel Products for Domestic Shipment
A701-96(2000) Standard Specification for Ferromanganese-Silicon
A702-89(2000) Standard Specification for Steel Fence Posts and Assemblies, Hot Wrought
A703/A703M-03 Standard Specification for Steel Castings, General Requirements, for Pressure-Containing Parts
A704/A704M-01 Standard Specification for Welded Steel Plain Bar or Rod Mats for Concrete Reinforcement
A705/A705M-95(2000) Standard Specification for Age-Hardening Stainless Steel Forgings
A706/A706M-04 Standard Specification for Low-Alloy Steel Deformed and Plain Bars for Concrete Reinforcement
A707/A707M-02 Standard Specification for Forged Carbon and Alloy Steel Flanges for Low-Temperature Service
A709/A709M-03a Standard Specification for Carbon and High-Strength Low-Alloy Structural Steel Shapes, Plates, and Bars and Quenched-and-Tempered Alloy Structural Steel Plates for Bridges
A710/A710M-02 Standard Specification for Precipitation-Strengthened Low-Carbon Nickel-Copper-Chromium-Molybdenum-Columbium Alloy Structural Steel Plates
A711-03 Standard Specification for Steel Forging Stock
A712-97(2002) Standard Test Method for Electrical Resistivity of Soft Magnetic Alloys
A713-93(1998) Standard Specification for Steel Wire, High-Carbon Spring, for Heat-Treated Components
A714-99(2003) Standard Specification for High-Strength Low-Alloy Welded and Seamless Steel Pipe
A716-03 Standard Specification for Ductile Iron Culvert Pipe
A717/A717M-01 Standard Test Method for Surface Insulation Resistivity of Single-Strip Specimens
A719/A719M-02 Standard Test Method for Lamination Factor of Magnetic Materials
A720/A720M-02 Standard Test Method for Ductility of Nonoriented Electrical Steel
A721/A721M-02 Standard Test Method for Ductility of Oriented Electrical Steel
A722/A722M-98(2003) Standard Specification for Uncoated High-Strength Steel Bar for Prestressing Concrete
A723/A723M-02 Standard Specification for Alloy Steel Forgings for High-Strength Pressure Component Application
A724/A724M-99 Standard Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, Quenched and Tempered, for Welded Layered Pressure Vessels
A726-00 Standard Specification for Cold-Rolled Magnetic Lamination Quality Steel, Semiprocessed Types
A727/A727M-02 Standard Specification for Carbon Steel Forgings for Piping Components with Inherent Notch Toughness
A729-93(1999) Standard Specification for Alloy Steel Axles, Heat-Treated, for Mass Transit and Electric Railway Service
A730-93(1999) Standard Specification for Forgings, Carbon and Alloy Steel, for Railway Use
A732/A732M-02 Standard Specification for Castings, Investment, Carbon and Low Alloy Steel for General Application, and Cobalt Alloy for High Strength at Elevated Temperatures
A733-03 Standard Specification for Welded and Seamless Carbon Steel and Austenitic Stainless Steel Pipe Nipples
A734/A734M-87a(2003) Standard Specification for Pressure Vessel Plates, Alloy Steel and High-Strength Low-Alloy Steel, Quenched-and-Tempered
A735/A735M-03 Standard Specification for Pressure Vessel Plates, Low-Carbon Manganese-Molybdenum-Columbium Alloy Steel, for Moderate and Lower Temperature Service
A736/A736M-03 Standard Specification for Pressure Vessel Plates, Low-Carbon Age-Hardening Nickel-Copper-Chromium-Molybdenum-Columbium and Nickel-Copper-Manganese-Molybdenum-Columbium Alloy Steel
A737/A737M-99 Standard Specification for Pressure Vessel Plates, High-Strength, Low-Alloy Steel
A738/A738M-03a Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel, for Moderate and Lower Temperature Service
A739-90a(2000) Standard Specification for Steel Bars, Alloy, Hot-Wrought, for Elevated Temperature or Pressure-Containing Parts, or Both
A740-98(2003) Standard Specification for Hardware Cloth (Woven or Welded Galvanized Steel Wire Fabric)
A741-98(2003) Standard Specification for Zinc-Coated Steel Wire Rope and Fittings for Highway Guardrail
A742/A742M-03 Standard Specification for Steel Sheet, Metallic Coated and Polymer Precoated for Corrugated Steel Pipe
A743/A743M-03 Standard Specification for Castings, Iron-Chromium, Iron-Chromium-Nickel, Corrosion Resistant, for General Application
A744/A744M-00e1 Standard Specification for Castings, Iron-Chromium-Nickel, Corrosion Resistant, for Severe Service
A745/A745M-94(2003) Standard Practice for Ultrasonic Examination of Austenitic Steel Forgings
A746-03 Standard Specification for Ductile Iron Gravity Sewer Pipe
A747/A747M-99 Standard Specification for Steel Castings, Stainless, Precipitation Hardening
A748/A748M-87(2003) Standard Specification for Statically Cast Chilled White Iron-Gray Iron Dual Metal Rolls for Pressure Vessel Use
A749/A749M-97(2002) Standard Specification for Steel, Strip, Carbon and High-Strength, Low-Alloy, Hot-Rolled, General Requirements for
A750-77(1994)e1 Standard Specification for Steel Air Ventilating Grille Units for Detention Areas
A751-01 Standard Test Methods, Practices, and Terminology for Chemical Analysis of Steel Products
A752-93(2003) Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Alloy Steel
A752M-93(2003) Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Alloy Steel [Metric]
A753-02 Standard Specification for Wrought Nickel-Iron Soft Magnetic Alloys (UNS K94490, K94840, N14076, N14080)
A754/A754M-96(2000) Standard Test Method for Coating Weight (Mass) of Metallic Coatings on Steel by X-Ray Fluorescence
A755/A755M-01 Standard Specification for Steel Sheet, Metallic Coated by the Hot-Dip Process and Prepainted by the Coil-Coating Process for Exterior Exposed Building Products
A756-94(2001) Standard Specification for Stainless Anti-Friction Bearing Steel
A757/A757M-00 Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing and Other Applications, for Low-Temperature Service
A758/A758M-00 Standard Specification for Wrought-Carbon Steel Butt-Welding Piping Fittings with Improved Notch Toughness
A759-00 Standard Specification for Carbon Steel Crane Rails
A760/A760M-01a Standard Specification for Corrugated Steel Pipe, Metallic-Coated for Sewers and Drains
A761/A761M-03 Standard Specification for Corrugated Steel Structural Plate, Zinc-Coated, for Field-Bolted Pipe, Pipe-Arches, and Arches
A762/A762M-00 Standard Specification for Corrugated Steel Pipe, Polymer Precoated for Sewers and Drains
A763-93(1999)e1 Standard Practices for Detecting Susceptibility to Intergranular Attack in Ferritic Stainless Steels
A764-95(2001) Standard Specification for Metallic Coated Carbon Steel Wire, Coated at Size and Drawn to Size for Mechanical Springs
A765/A765M-01 Standard Specification for Carbon Steel and Low-Alloy Steel Pressure-Vessel-Component Forgings with Mandatory Toughness Requirements
A767/A767M-00b Standard Specification for Zinc-Coated (Galvanized) Steel Bars for Concrete Reinforcement
A768-95(2001) Standard Specification for Vacuum-Treated 12% Chromium Alloy Steel Forgings for Turbine Rotors and Shafts
A769/A769M-00 Standard Specification for Carbon and High-Strength Electric Resistance Welded Steel Structural Shapes
A770/A770M-03 Standard Specification for Through-Thickness Tension Testing of Steel Plates for Special Applications
A771/A771M-95(2001) Standard Specification for Seamless Austenitic and Martensitic Stainless Steel Tubing for Liquid Metal-Cooled Reactor Core Components
A772/A772M-00 Standard Test Method for ac Magnetic Permeability of Materials Using Sinusoidal Current
A773/A773M-01 Standard Test Method for dc Magnetic Properties of Materials Using Ring and Permeameter Procedures with dc Electronic Hysteresigraphs
A774/A774M-02 Standard Specification for As-Welded Wrought Austenitic Stainless Steel Fittings for General Corrosive Service at Low and Moderate Temperatures
A775/A775M-01 Standard Specification for Epoxy-Coated Reinforcing Steel Bars
A778-01 Standard Specification for Welded, Unannealed Austenitic Stainless Steel Tubular Products
A779/A779M-00 Standard Specification for Steel Strand, Seven-Wire, Uncoated, Compacted, Stress-Relieved for Prestressed Concrete
A780-01 Standard Practice for Repair of Damaged and Uncoated Areas of Hot-Dip Galvanized Coatings
A781/A781M-03a Standard Specification for Castings, Steel and Alloy, Common Requirements, for General Industrial Use
A782/A782M-90(2001) Standard Specification for Pressure-Vessel Plates, Quenched-and-Tempered, Manganese-Chromium-Molybdenum-Silicon Zirconium Alloy Steel
A786/A786M-00b Standard Specification for Hot-Rolled Carbon, Low-Alloy, High-Strength Low-Alloy, and Alloy Steel Floor Plates
A787-01 Standard Specification for Electric-Resistance-Welded Metallic-Coated Carbon Steel Mechanical Tubing
A788-03a Standard Specification for Steel Forgings, General Requirements
A789/A789M-02a Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General Service
A790/A790M-03 Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe
A792/A792M-03 Standard Specification for Steel Sheet, 55 % Aluminum-Zinc Alloy-Coated by the Hot-Dip Process
A793-96(2001) Standard Specification for Rolled Floor Plate, Stainless Steel
A794-97(2002) Standard Specification for Commercial Steel (CS), Sheet, Carbon (0.16% Maximum to 0.25% Maximum), Cold-Rolled
A795-00 Standard Specification for Black and Hot-Dipped Zinc-Coated (Galvanized) Welded and Seamless Steel Pipe for Fire Protection Use
A796/A796M-03 Standard Practice for Structural Design of Corrugated Steel Pipe, Pipe-Arches, and Arches for Storm and Sanitary Sewers and Other Buried Applications
A798/A798M-01 Standard Practice for Installing Factory-Made Corrugated Steel Pipe for Sewers and Other Applications
A799/A799M-92(2002) Standard Practice for Steel Castings, Stainless, Instrument Calibration, for Estimating Ferrite Content
A800/A800M-01 Standard Practice for Steel Casting, Austenitic Alloy, Estimating Ferrite Content Thereof
A801/A801M-99 Standard Specification for Wrought Iron-Cobalt High Magnetic Saturation Alloys UNS R30005 and K92650
A802/A802M-95(2001) Standard Practice for Steel Castings, Surface Acceptance Standards, Visual Examination
A803/A803M-03 Standard Specification for Welded Ferritic Stainless Steel Feedwater Heater Tubes
A804/A804M-99 Standard Test Methods for Alternating-Current Magnetic Properties of Materials at Power Frequencies Using Sheet-Type Test Specimens
A805-93(2002) Standard Specification for Steel, Flat Wire, Carbon, Cold-Rolled
A807/A807M-02e1 Standard Practice for Installing Corrugated Steel Structural Plate Pipe for Sewers and Other Applications
A808/A808M-00a Standard Specification for High-Strength, Low-Alloy Carbon, Manganese, Columbium, Vanadium Steel of Structural Quality with Improved Notch Toughness
A809-98 Standard Specification for Aluminum-Coated (Aluminized) Carbon Steel Wire
A810-01 Standard Specification for Zinc-Coated (Galvanized) Steel Pipe Winding Mesh
A811-03 Standard Specification for Soft Magnetic Iron Parts Fabricated by Powder Metallurgy (P/M) Techniques
A813/A813M-01 Standard Specification for Single- or Double-Welded Austenitic Stainless Steel Pipe
A814/A814M-03 Standard Specification for Cold-Worked Welded Austenitic Stainless Steel Pipe
A815/A815M-01a Standard Specification for Wrought Ferritic, Ferritic/Austenitic, and Martensitic Stainless Steel Piping Fittings
A817-03 Standard Specification for Metallic-Coated Steel Wire for Chain-Link Fence Fabric and Marcelled Tension Wire
A818-91(2001) Standard Specification for Coppered Carbon Steel Wire
A820-01 Standard Specification for Steel Fibers for Fiber-Reinforced Concrete
A821/A821M-99 Standard Specification for Steel Wire, Hard Drawn for Prestressing Concrete Tanks
A822-90(2000) Standard Specification for Seamless Cold-Drawn Carbon Steel Tubing for Hydraulic System Service
A823-99(2003) Standard Specification for Statically Cast Permanent Mold Gray Iron Castings
A824-01 Standard Specification for Metallic-Coated Steel Marcelled Tension Wire for Use With Chain Link Fence
A826/A826M-95(2001) Standard Specification for Seamless Austenitic and Martensitic Stainless Steel Duct Tubes for Liquid Metal-Cooled Reactor Core Components
A827/A827M-02 Standard Specification for Plates, Carbon Steel, for Forging and Similar Applications
A829/A829M-00 Standard Specification for Alloy Structural Steel Plates
A830/A830M-02 Standard Specification for Plates, Carbon Steel, Structural Quality, Furnished to Chemical Composition Requirements
A831/A831M-95(2000) Standard Specification for Austenitic and Martensitic Stainless Steel Bars, Billets, and Forgings for Liquid Metal Cooled Reactor Core Components
A832/A832M-99e1 Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum-Vanadium
A833-84(2001) Standard Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers
A834-95(2001) Standard Specification for Common Requirements for Iron Castings for General Industrial Use
A835-84(2000) Standard Specification for Sizes of Ferroalloys and Alloy Additives
A836/A836M-02 Standard Specification for Titanium-Stabilized Carbon Steel Forgings for Glass-Lined Piping and Pressure Vessel Service
A837/A837M-03 Standard Specification for Steel Forgings, Alloy, for Carburizing Applications
A838-02 Standard Specification for Free-Machining Ferritic Stainless Soft Magnetic Alloy Bar for Relay Applications
A839-02 Standard Specification for Iron-Phosphorus Powder Metallurgy (P/M) Parts for Soft Magnetic Applications
A840/A840M-00 Standard Specification for Fully Processed Magnetic Lamination Steel
A841/A841M-03a Standard Specification for Steel Plates for Pressure Vessels, Produced by Thermo-Mechanical Control Process (TMCP)
A842-85(1997) Standard Specification for Compacted Graphite Iron Castings
A844/A844M-93(1999) Standard Specification for Steel Plates, 9% Nickel Alloy, for Pressure Vessels, Produced by the Direct-Quenching Process
A845-85(2000) Standard Specification for Titanium Scrap for Use in Deoxidation and Alloying of Steel
A846-85(2000) Standard Specification for Aluminum Scrap for Use in Deoxidation and Alloying of Steel
A847-99a(2003) Standard Specification for Cold-Formed Welded and Seamless High Strength, Low Alloy Structural Tubing with Improved Atmospheric Corrosion Resistance
A848-01 Standard Specification for Low-Carbon Magnetic Iron
A849-00 Standard Specification for Post-Applied Coatings, Pavings, and Linings for Corrugated Steel Sewer and Drainage Pipe
A852/A852M-03 Standard Specification for Quenched and Tempered Low-Alloy Structural Steel Plate with 70 ksi [485 MPa] Minimum Yield Strength to 4 in. [100 mm] Thick
A853-93(2003) Standard Specification for Steel Wire, Carbon, for General Use
A854/A854M-98(2003) Standard Specification for Metallic-Coated Steel Smooth High-Tensile Fence and Trellis Wire
A855/A855M-98 Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Wire Strand
A856/A856M-98 Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Carbon Steel Wire
A857/A857M-00a Standard Specification for Steel Sheet Piling, Cold Formed, Light Gage
A858/A858M-00 Standard Specification for Heat-Treated Carbon Steel Fittings for Low-Temperature and Corrosive Service
A859/A859M-02 Standard Specification for Age-Hardening Alloy Steel Forgings for Pressure Vessel Components
A860/A860M-00 Standard Specification for Wrought High-Strength Low-Alloy Steel Butt-Welding Fittings
A861-02 Standard Specification for High-Silicon Iron Pipe and Fittings
A862/A862M-98 Standard Practice for Application of Asphalt Coatings to Corrugated Steel Sewer and Drainage Pipe
A865-03 Standard Specification for Threaded Couplings, Steel, Black or Zinc-Coated (Galvanized) Welded or Seamless, for Use in Steel Pipe Joints
A866-01 Standard Specification for Medium Carbon Anti-Friction Bearing Steel
A867-03 Standard Specification for Iron-Silicon Relay Steels
A871/A871M-03 Standard Specification for High-Strength Low-Alloy Structural Steel Plate With Atmospheric Corrosion Resistance
A872/A872M-02 Standard Specification for Centrifugally Cast Ferritic/Austenitic Stainless Steel Pipe for Corrosive Environments
A874/A874M-98 Standard Specification for Ferritic Ductile Iron Castings Suitable for Low-Temperature Service
A875/A875M-02a Standard Specification for Steel Sheet, Zinc-5% Aluminum Alloy-Coated by the Hot-Dip Process
A876-03 Standard Specification for Flat-Rolled, Grain-Oriented, Silicon-Iron, Electrical Steel, Fully Processed Types
A877/A877M-99 Standard Specification for Steel Wire, Chromium-Silicon Alloy Valve Spring Quality
A878/A878M-99 Standard Specification for Steel Wire, Modified Chromium Vanadium Valve Spring Quality
A879-00 Standard Specification for Steel Sheet, Zinc Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface
A880-95 Standard Practice for Criteria for Use in Evaluation of Testing Laboratories and Organizations for Examination and Inspection of Steel, Stainless Steel, and Related Alloys
A881/A881M-02 Standard Specification for Steel Wire, Deformed, Stress-Relieved or Low-Relaxation for Prestressed Concrete Railroad Ties
A882/A882M-02a Standard Specification for Filled Epoxy-Coated Seven-Wire Prestressing Steel Strand
A883/A883M-01 Standard Test Method for Ferrimagnetic Resonance Linewidth and Gyromagnetic Ratio of Nonmetallic Magnetic Materials
A884/A884M-02 Standard Specification for Epoxy-Coated Steel Wire and Welded Wire Fabric for Reinforcement
A885/A885M-96(2002) Standard Specification for Steel Sheet, Zinc and Aramid Fiber Composite Coated for Corrugated Steel Sewer, Culvert, and Underdrain Pipe
A886/A886M-02 Standard Specification for Steel Strand, Indented, Seven-Wire Stress-Relieved for Prestressed Concrete
A887-89(2000) Standard Specification for Borated Stainless Steel Plate, Sheet, and Strip for Nuclear Application
A888-03 Standard Specification for Hubless Cast Iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Applications
A889/A889M-03 Standard Test Method for Alternating-Current Magnetic Properties of Materials at Low Inductions Using the Wattmeter-Varmeter-Ammeter-Voltmeter Method and 25-cm (250-mm) Epstein Frame
A890/A890M-99(2003) Standard Specification for Castings, Iron-Chromium-Nickel-Molybdenum Corrosion-Resistant, Duplex (Austenitic/Ferritic) for General Application
A891-98(2003) Standard Specification for Precipitation Hardening Iron Base Superalloy Forgings for Turbine Rotor Disks and Wheels
A892-88(2001) Standard Guide for Defining and Rating the Microstructure of High Carbon Bearing Steels
A893/A893M-03 Standard Test Method for Complex Dielectric Constant of Nonmetallic Magnetic Materials at Microwave Frequencies
A894/A894M-00 Standard Test Method for Saturation Magnetization or Induction of Nonmetallic Magnetic Materials
A895-89(2000) Standard Specification for Free-Machining Stainless Steel Plate, Sheet, and Strip
A896-89(1999) Standard Practice for Conducting Case Studies on Galvanized Structures
A897/A897M-03 Standard Specification for Austempered Ductile Iron Castings
A898/A898M-91(2001) Standard Specification for Straight Beam Ultrasonic Examination of Rolled Steel Structural Shapes
A899-91(2002) Standard Specification for Steel Wire, Epoxy-Coated
A900/A900M-01 Standard Test Method for Lamination Factor of Amorphous Magnetic Strip
A901-03 Standard Specification for Amorphous Magnetic Core Alloys, Semi-Processed Types
A902-03 Standard Terminology Relating to Metallic Coated Steel Products
A903/A903M-99(2003) Standard Specification for Steel Castings, Surface Acceptance Standards, Magnetic Particle and Liquid Penetrant Inspection
A904-98 Standard Specification for 50 Nickel-50 Iron Powder Metallurgy (P/M) Soft Magnetic Alloys
A905-93(1998) Standard Specification for Steel Wire, Pressure Vessel Winding
A906/A906M-02 Standard Specification for Grade 80 and Grade 100 Alloy Steel Chain Slings for Overhead Lifting
A908-03 Standard Specification for Stainless Steel Needle Tubing
A909-03 Standard Specification for Steel Forgings, Microalloy, for General Industrial Use
A910/A910M-99 Standard Specification for Uncoated, Weldless, 2- and 3-Wire Steel Strand for Prestressed Concrete
A911/A911M-02 Standard Specification for Uncoated, Stress-Relieved Steel Bars for Prestressed Concrete Ties
A912-93(1998) Standard Test Method for Alternating-Current Magnetic Properties of Amorphous Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method with Toroidal Specimens
A913/A913M-03 Standard Specification for High-Strength Low-Alloy Steel Shapes of Structural Quality, Produced by Quenching and Self-Tempering Process (QST)
A914/A914M-92(1999)e1 Standard Specification for Steel Bars Subject to Restricted End-Quench Hardenability Requirements
A915/A915M-93(2003) Standard Specification for Steel Castings, Carbon, and Alloy, Chemical Requirements Similar to Standard Wrought Grades
A917-00 Standard Specification for Steel Sheet, Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface (General Requirements)
A918-00 Standard Specification for Steel Sheet, Zinc-Nickel Alloy Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface
A920/A920M-02a Standard Specification for Steel Bars, Microalloy, Hot-Wrought, Special Quality, Mechanical Properties
A921/A921M-93(1999) Standard Specification for Steel Bars, Microalloy, Hot-Wrought, Special Quality, for Subsequent Hot Forging
A922-93(2000) Standard Specification for Silicon Metal
A923-03 Standard Test Methods for Detecting Detrimental Intermetallic Phase in Wrought Duplex Austenitic/Ferritic Stainless Steels
A924/A924M-99 Standard Specification for General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process
A925-98 Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Overhead Ground Wire Strand
A926-03 Standard Test Method for Comparing the Abrasion Resistance of Coating Materials for Corrugated Metal Pipe
A927/A927M-99 Standard Test Method for Alternating-Current Magnetic Properties of Toroidal Core Specimens Using the Voltmeter-Ammeter-Wattmeter Method
A928/A928M-00 Standard Specification for Ferritic/Austenitic (Duplex) Stainless Steel Pipe Electric Fusion Welded with Addition of Filler Metal
A929/A929M-01 Standard Specification for Steel Sheet, Metallic-Coated by the Hot-Dip Process for Corrugated Steel Pipe
A930-03 Standard Practice for Life-Cycle Cost Analysis of Corrugated Metal Pipe Used for Culverts, Storm Sewers, and Other Buried Conduits
A931-96(2002) Standard Test Method for Tension Testing of Wire Ropes and Strand
A932/A932M-01 Standard Test Method for Alternating-Current Magnetic Properties of Amorphous Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method with Sheet Specimens
A933/A933M-95(2001) Standard Specification for Vinyl (PVC) Coated Steel Wire and Welded Wire Fabric for Reinforcement
A934/A934M-03 Standard Specification for Epoxy-Coated Prefabricated Steel Reinforcing Bars
A937/A937M-01 Standard Test Method for Determining Interlaminar Resistance of Insulating Coatings Using Two Adjacent Test Surfaces
A938-97(2003) Standard Test Method for Torsion Testing of Wire
A939-96(2001) Standard Test Method for Ultrasonic Examination from Bored Surfaces of Cylindrical Forgings
A940-96(2001) Standard Specification for Vacuum Treated Steel Forgings, Alloy, Differentially Heat Treated, for Turbine Rotors
A941-03 Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys
A942-95(2001) Standard Specification for Centrifugally Cast White Iron/Gray Iron Dual Metal Abrasion- Resistant Roll Shells
A943/A943M-01 Standard Specification for Spray-Formed Seamless Austenitic Stainless Steel Pipes
A944-99 Standard Test Method for Comparing Bond Strength of Steel Reinforcing Bars to Concrete Using Beam-End Specimens
A945/A945M-00 Standard Specification for High-Strength Low-Alloy Structural Steel Plate with Low Carbon and Restricted Sulfur for Improved Weldability, Formability, and Toughness
A946-95(2000) Standard Specification for Chromium, Chromium-Nickel and Silicon Alloy Steel Plate, Sheet, and Strip for Corrosion and Heat Resisting Service
A947M-95(2000) Standard Specification for Textured Stainless Steel Sheet [Metric]
A949/A949M-01 Standard Specification for Spray-Formed Seamless Ferritic/Austenitic Stainless Steel Pipe
A950/A950M-99(2003) Standard Specification for Fusion Bonded Epoxy-Coated Structural Steel H-Piles and Sheet Piling
A951-02 Standard Specification for Masonry Joint Reinforcement
A952/A952M-02 Standard Specification for Forged Grade 80 and Grade 100 Steel Lifting Components and Welded Attachment Links
A953-02 Standard Specification for Austenitic Chromium-Nickel-Silicon Alloy Steel Seamless and Welded Tubing
A954-02 Standard Specification for Austenitic Chromium-Nickel-Silicon Alloy Steel Seamless and Welded Pipe
A955/A955M-03b Standard Specification for Deformed and Plain Stainless Steel Bars for Concrete Reinforcement
A956-02 Standard Test Method for Leeb Hardness Testing of Steel Products
A957-03 Standard Specification for Investment Castings, Steel and Alloy, Common Requirements, for General Industrial Use
A958-00 Standard Specification for Steel Castings, Carbon, and Alloy, with Tensile Requirements, Chemical Requirements Similar to Standard Wrought Grades
A959-03 Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels
A960-03 Standard Specification for Common Requirements for Wrought Steel Piping Fittings
A961-02 Standard Specification for Common Requirements for Steel Flanges, Forged Fittings, Valves, and Parts for Piping Applications
A962/A962M-03 Standard Specification for Common Requirements for Steel Fasteners or Fastener Materials, or Both, Intended for Use at Any Temperature from Cryogenic to the Creep Range
A964/A964M-02 Standard Specification for Corrugated Steel Box Culverts
A965/A965M-02 Standard Specification for Steel Forgings, Austenitic, for Pressure and High Temperature Parts
A966/A966M-96(2001) Standard Test Method for Magnetic Particle Examination of Steel Forgings Using Alternating Current
A967-01e1 Standard Specification for Chemical Passivation Treatments for Stainless Steel Parts
A968/A968M-96(2001) Standard Specification for Chromium, Chromium-Nickel, and Silicon Alloy Steel Bars and Shapes for Corrosion and Heat-Resisting Service
A970/A970M-98 Standard Specification for Welded or Forged Headed Bars for Concrete Reinforcement
A971-00 Standard Test Method for Measuring Edge Taper and Crown of Flat-Rolled Electrical Steel Coils
A972/A972M-00 Standard Specification for Fusion Bonded Epoxy-Coated Pipe Piles
A973/A973M-01 Standard Specification for Grade 100 Alloy Steel Chain
A974-97(2003) Standard Specification for Welded Wire Fabric Gabions and Gabion Mattresses (Metallic Coated or Polyvinyl Chloride (PVC) Coated)
A975-97(2003) Standard Specification for Double-Twisted Hexagonal Mesh Gabions and Revet Mattresses (Metallic-Coated Steel Wire or Metallic-Coated Steel Wire With Poly(Vinyl Chloride) (PVC) Coating)
A976-03 Standard Classification of Insulating Coatings by Composition, Relative Insulating Ability and Application
A977/A977M-02 Standard Test Method for Magnetic Properties of High-Coercivity Permanent Magnet Materials Using Hysteresigraphs
A978/A978M-97(2002)e1 Standard Specification for Composite Ribbed Steel Pipe, Precoated and Polyethylene Lined for Gravity Flow Sanitary Sewers, Storm Sewers, and Other Special Applications
A979/A979M-03 Standard Specification for Concrete Pavements and Linings Installed in Corrugated Steel Structures in the Field
A980-97(2003) Standard Specification for Steel, Sheet, Carbon, Ultra High Strength Cold Rolled
A981-97(2002) Standard Test Method for Evaluating Bond Strength for 15.2 mm (0.6 in.) Diameter Prestressing Steel Strand, Grade 270, Uncoated, Used in Prestressed Ground Anchors
A982-02 Standard Specification for Steel Forgings, Stainless, for Compressor and Turbine Airfoils
A983/A983M-01 Standard Specification for Continuous Grain Flow Forged Carbon and Alloy Steel Crankshafts for Medium Speed Diesel Engines
A984/A984M-03 Standard Specification for Steel Line Pipe, Black, Plain-End, Electric-Resistance-Welded
A985/A985M-03 Standard Specification for Steel Investment Castings General Requirements, for Pressure-Containing Parts
A986/A986M-01 Standard Specification for Magnetic Particle Examination of Continuous Grain Flow Crankshaft Forgings
A987-00 Standard Test Method for Measuring Shape Characteristics of Tin Mill Products
A988-98(2002) Standard Specification for Hot Isostatically-Pressed Stainless Steel Flanges, Fittings, Valves, and Parts for High Temperature Service
A989-98(2002) Standard Specification for Hot Isostatically-Pressed Alloy Steel Flanges, Fittings, Valves, and Parts for High Temperature Service
A990-03 Standard Specification for Castings, Iron-Nickel-Chromium and Nickel Alloys, Specially Controlled for Pressure Retaining Parts for Corrosive Service
A991/A991M-98 Standard Test Method for Conducting Temperature Uniformity Surveys of Furnaces Used to Heat Treat Steel Products
A992/A992M-03 Standard Specification for Structural Steel Shapes
A993-98 Standard Test Method for Dynamic Tear Testing of Cast Irons to Establish Transition Temperature
A994-03 Standard Guide for Editorial Procedures and Form of Product Specifications for Steel, Stainless Steel, and Related Alloys
A995/A995M-98(2003) Standard Specification for Castings, Austenitic-Ferritic (Duplex) Stainless Steel, for Pressure-Containing Parts
A996/A996M-03b Standard Specification for Rail-Steel and Axle-Steel Deformed Bars for Concrete Reinforcement
A997-98(2003) Standard Practice for Investment Castings, Surface Acceptance Standards, Visual Examination
A998/A998M-98 Standard Practice for Structural Design of Reinforcements for Fittings in Factory-Made Corrugated Steel Pipe for Sewers and Other Applications
A999/A999M-01 Standard Specification for General Requirements for Alloy and Stainless Steel Pipe
A1000-99 Standard Specification for Steel Wire, Carbon and Alloy Specialty Spring Quality
A1001-01 Standard Specification for High Strength Steel Castings in Heavy Sections
A1002-99(2003) Standard Specification for Castings, Nickel-Aluminum Ordered Alloy
A1003/A1003M-02a Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members
A1004/A1004M-99 Standard Practice for Establishing Conformance to the Minimum Expected Corrosion Characteristics of Metallic, Painted-Metallic, and Nonmetallic-Coated Steel Sheet Intended for Use as Cold Formed Framing Members

Inspection & Approval Certificates : EN10204 3.1 / DIN 50049 3.1 / ISO 10474 3.1 Mill Test Certificate, NACE MR-01-03 / NACE MR-01-75 / ISO 15156, CE Marked, European Pressure Equipment Directive PED-97/23/EC, AD-2000-W0, ASME Boiler & Pressure Vessel Code Sec.II Part A Ed. 2008, with 3.2 certificate duly Certified & Approved by LRS (Lloyd's Register), GL (Germanischer Lloyd), BV (Bureau Veritas), DNV (Det Norske Veritas), ABS (American Bureau of Shipping), SGS, TUV, RINA, IRS, NORSOK Approved Standard M-630, M-650 Rev.3

Contact Us

Company Name :

Unisteels & Engineering Co. (P) Ltd.

Company Address :

52/52A, Islampura Street, Near Alankar
Cinema, Mumbai-400004, India

Phone :

91-22-2380 6452 / 6659 5316 / 6743 6950

Fax :

91-22-2386 4507

Contact Person :

Mr. Pukhraj Shah

Mobile :

0091-93240 49344

info@unisteels.in